MAKITA 18V BRUSHLESS 12 PIECE 3 X 5.0AH COMBO KIT DLX1202TX1

Includes

• 1 x MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z
• 1 x MAKITA 18V Brushless 1/4 Impact Driver Skin DTD172Z
• 1 x MAKITA 18V Brushless 125mm Slide Switch Angle Grinder Skin DGA504Z
• 1 x MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z
• 1 x MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z
• 1 x MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z
• 1 x MAKITA 18V Brushless Laminate Trimmer Skin DRT50Z
• 1 x MAKITA 18V Brushless 1/2inch Mid-Torque Impact Wrench Skin DTW700Z
• 1 x MAKITA 18V 7.5L Brushless Wet/Dry Vacuum Skin DVC750LZX1
• 1 x MAKITA 18V Brushless AWS 82mm Planer Skin DKP181Z
• 1 x MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3
• 1 x MAKITA 18V LED Torch Skin DML808
• 3 x MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L
• 1 x MAKITA 18V Lithium-ion Dual-Port Rapid Battery Charger DC18RD 1969360
• 1 x MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369

MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z

The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2.100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.

Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.

• Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model
• 3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter.
• LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application
• High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.
• 2 Speed Mechanical Gearing – high speed mode produces 2.100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
• All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability. and will continue to perform in years to come.
• XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions. increasing durability

Specifications

• Max. drilling capacities in wood:
  • Auger bit: 50mm
  • Self-feeding bit: 76mm
  • Hole saw: 152mm
• Max. drilling capacities in steel: 13mm
• Max. drilling capacities in masonry: 16mm
• No load speed:
  • Hi: 0 – 2.100rpm
  • Lo: 0 – 550rpm
• Impact rate:
  • Hi: 0 – 31.500ipm
  • Lo: 0 – 8.250ipm
• Max. peak torque: 141Nm
• Max. tightening torque:
  • Hard: 130Nm
  • Soft: 65Nm

MAKITA 18V Brushless 1/4 Impact Driver Skin DTD172Z

• 4 stages of impact selection plus two T-modes. A-mode and bolt mode
• On the go single hand impact selection button
• Impressive 180Nm of max. fastening torque
• XPT technology enhances dust and moisture protection
• Ultra compact design with twin dual side LEDs

MAKITA 18V Brushless 125mm Slide Switch Angle Grinder Skin DGA504Z

• Kickback detection. anti-restart. and soft start
• Automatic Torque Drive increases torque to power through any cut
• Extreme performance with 8.500rpm no load speed
• XPT technology that protects against dust & moisture
• Electronic current limiter
• Easy to hold grip design with rubber for anti-skid
• World’s deepest concrete cutting mobile angle grinder at a depth of 20mm
• Excellent performance – as powerful as AC model
• Gear housing can be rotated to suit most cutting and grinding applications
• Automatic speed control changes the cutting speed according to load condition for an optimum operation
• Anti-restart function prevents accidental startup for safety even if the machine is plugged into a power source with the lock-on switch on

MAKITA 18V Brushless SDS+ Rotary Hammer Skin DHR242Z

• 3 Mode operation: hammer only. rotation only. rotation & hammer
• Unique rubber joint suppresses vibration to battery
• 2.0j of impact energy

Specifications

• Impact Rate: 0 – 4.700ipm
• Vibration per min: 13.5m/s²

MAKITA 18V Brushless 165mm Circular Saw Skin DHS680Z

• Powerful Brushless DC motor (BLDC)
• Automatic Torque Drive; automatically increases motor torque according to load conditions
• Magnesium base with 45 and 50 degrees bevel cutting capacity
• Compact and lightweight design
• Rear dust exhaust port
• Twin LED job light with pre-glow
• LED indicator panel with 3 indicators for: Battery Fuel Gauge. Automatic Torque Drive and Overload Protection
• Tool hanger for hanging on a ladder or rafter
• Large lock off lever easily operated even with a gloved hand
• Compatible with 1.5. 3.0. 4.0 and 5.0Ah Lithium-Ion batteries

Specifications

• Voltage: 18V
• No Load Speed: 5.000rpm
• Bevel Capacity: 50º
• Blade Diameter: 165mm
• Max Cutting Capacities:
• 0º: 57mm
• 45º: 41mm
• 50º: 37mm
• Weight: 3.3kg
• Length: 350mm

MAKITA 18V Brushless Reciprocating Saw Skin DJR187Z

• 32mm stroke with a cutting capacity of 255mm in wood
• Newly designed vertical crank mechanism reduces vibration
• High performance 3.000spm no-load speed
• Rafter hanging hook for added convenience
• XPT technology that protects against dust & moisture

Specifications

• Length of Stroke: 32mm
• Max. cutting capacities in pipe: ø 130mm
• Max. cutting capacities in wood: 255mm
• Overall Length: 439mm
• Strokes per minute
  • Hi: 0 – 3.000spm
  • Lo: 0 – 2.300spm
• Voltage 18V

MAKITA 18V Brushless Laminate Trimmer Skin DRT50Z

• On/off switch with safety lock and variable speed – Prevents accidental start up of the tool during use or transport. protecting the user and the workpiece
• Shaft lock – easy installation and removal of trimmer bit with signle wrench by pressing the shaft lock
• Soft start – minimises start up shock and makes the tool start smoothly for optimum control
• BL Brushless Motor – Provides more power to the motor whilst inceasing runtime and durability
• Varibale speed control dial – The rotation speed of the tool can be changed from 10.000 – 30.000rpm by turning the speed dial
• Aluminium base with accurate rack and pinion depth adjustment
• LED job light for improved visibility
• Constant speed control – Provides constant rotation speed regadless of load conditions
• Collet capacity: 6.35mm (1/4)
• Net Weight: 2.1kg (w/ 6.0Ah battery)
• No Load Speed: 10.000-30.000rpm
• Overall Length: 226mm
• Variety of optional accessories are included with this kit

MAKITA 18V Brushless 1/2inch Mid-Torque Impact Wrench Skin DTW700Z

The 18V Brushless Impact Wrench is designed to suit the needs of manufacturing technicians. mechanics and fabricators. The DTW700 has an efficient Makita Brushless Motor. providing powerful torque in a compact design with 700Nm of maximum fastening torque and a powerful 1.000Nm of nut busting torque. The DTW700 features 4-stage power selection. increasing versatility and allowing the user to select the optimum rpm and fastening torque for the task at hand. It also features a forward and reverse automatic stop function. with 6 modes optimised for fastening applications. providing the user with more control during use.

• Compact design for comfortable handling at only 170mm in length
• 4 Stage power selection for optimum rpm and fastening torque
• Maximum nut busting torque of 1.000Nm with 700Nm max. fastening
• Unique rubber joint suppress vibration to battery terminals
• Forward & reverse auto stop function. optimised for fastening applications

Specifications

• Max. capacities standard bolt: M10-M24
• Max. capacities high tensile bolt: M10-M16
• No load speed:
• Max: 0-2.200rpm
• Hard: 0-1.900rpm
• Med: 0-1.200rpm
• Soft: 0-500rpm
• Impact rate:
• Max: 0-2.700ipm
• Hard: 0-2.400ipm
• Med: 0-1.700ipm
• Soft: 0-1.000ipm
• Max. fastening torque:
• Max: 700Nm
• Hard: 320Nm
• Med: 200Nm
• Soft: 150Nm
• Nut busting torque: 1.000Nm
• Drive shank: 12.7mm Square

MAKITA 18V 7.5L Brushless Wet/Dry Vacuum Skin DVC750LZX1

Designed to suit the needs of trades who require portable dust extraction for wet & dry applications. Develop a lightweight dust extractor for use with power tools and wet or dry detail cleaning

• 2 Stage Suction Control -optimises power and endurance providing either 55W or 20W of suction power
• HEPA Filter provides high filtration rate of 99.97%
• Brushless Motor efficient Brushless motor provides a runtime of up to 70 minutes
• Flexible 2.5m Hose collapses down incorporatingon-board storage for added convenience
• Washable Filter ideal for use in wet or dry applications€¢Battery Fuel Gauge able to check life of the battery without opening the hatch or removing the battery
• Standard Accessories wide nozzle and sash nozzle for detailed cleaning are stored conveniently on board

Specifications

• Voltage: 18V
• Max Sealed Suction: 6.7kPa
• Max Air Flow: 1.8m³/min
• Tank Capacity: 7.5L
• Standard Hose: 32mm x 2.5m
• Weight inc Battery: 4.6kg

MAKITA 18V Brushless AWS 82mm Planer Skin DKP181Z

The DKP181Z delivers heavy duty cutting performance with a high powered Brushless Motor. allowing a massive 3mm max. cutting depth. Coupled with Automatic Torque Drive technology the planer automatically adjusts speed and torque depending on the load conditions for optimal cutting. Also featuring an electric brake and a foot on the base plate. increasing safety and protecting workpieces from any possible damage.

The DKP181Z features AWS*. enabling wireless connection to a compatible Bluetooth vacuum for on demand dust extraction. providing a cleaner and safer work environment.

• High powered motor allows maximum 3mm cutting depth
• Auto start Wireless System (AWS) for on demand dust extraction*
• 12.000rpm no load speed with Automatic Torque Drive performance
• Left or right side chip ejection
• Electric brake & foot on base plate protect workpiece from damage

Specifications

• Planing width: 82mm
• Max. planning depth: 3mm
• Shiplapping / rebate: 25mm
• Noise: 84db(A)
• Vibration: 5.0m/s²

*AWS receiver sold separately

MAKITA 18V Brushless Starlock Max Multi-Tool Skin DTM52ZX3

The Makita 18V LXT Brushless Multi Tool (DTM52) delivers more power and less vibration than ever before. The DTM52 is engineered with premium features like AVT for reduced vibration and lower noise. While the new STARLOCK Max accessory mount system provides improved performance. ideal for cutting. sanding. scraping. grout removal. and more.

The DTM52 delivers increased cutting efficiency with an improved oscillation angle of 3.6 engineered for faster. more aggressive cutting and sanding. The variable speed control dial (6.000 20.000 OPM) and soft start feature enable the user to match the speed to the application with more control.

The DTM52 is engineered for a range of applications including cutting. sanding. scraping. grout removal. and more. It is ideal for builders. carpenters. plumbers. wood floor installers. and general trades seeking a best in class cordless multi tool.

• Starlock accessory mounting system designed for heavy duty applications
• Anti Vibration Technology (AVT) with a counterbalance system significantly reducing vibration
• Increased cutting efficiency with improved oscillation angle of 3.6 for rapid cutting speeds
• Variable speed control dial for adjusting the speed to suit the application
• Tool less lever lock system allows for quick install and removal of accessories
• Includes a Bow Shape Plunge Cut Saw Blade

Specifications

• Oscillation angle.left/right: 1.8 Degrees (3.6 Degrees Total)
• Oscillation per/min: 10.000 – 20.000opm
• Vibration: 2.5 m/s²
• Noise: 69dB(A)
• Voltage: 18V
• Tool-less Accessory Change: Yes
• Starlock Compatible: Yes
• Starlock Max Compatible: Yes

MAKITA 18V LED Torch Skin DML808

The 18V LXT® Lithium-Ion L.E.D. Flashlight (model DML808) provides bright illumination. versatility. and convenience. The high-luminance single L.E.D. flashlight provides a full 200 lumens of light and a sharp. round spotlight. Features include a beam adjustment from spot to flood. and a 12-position pivoting head with positive stops from 60° to 110°. When used with a fast-charging 18V LXT® Lithium-Ion 5.0Ah battery (sold separately). the flashlight delivers up to 23 hours of continuous illumination on a single charge. The Flashlight can be powered by Makita 18V LXT and 18V LXT Compact Lithium-Ion batteries.

Added features include aluminum flashlight head for increased durability and a metal hang-hook. The flashlight has a slim. compact design at 11-3/4”L and weighs only 2.5 lbs. (with 18V LXT® battery. sold separately).

It’s part of Makita’s expanding 18V Lithium-Ion system. the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories. so they spend more time working and less time sitting on the charger.

• High-luminance single L.E.D. flashlight provides 200 lumens
• Beam adjustment from spot to flood by simply rotating the focusing ring
• 12 position pivoting flashlight head with positive stops from 60º – 110º
• Aluminum flashlight head design for increased durability
• Metal hang hook is convenient and job site durable
• Multi-faceted reflector controls the direction and spread of the light
• Compact and ergonomic design at only 11-3/4 long
• L.E.D. and provides a sharp. round spotlight
• Weighs only 2.5 lbs. with battery (battery and charger not included)
• Rubberized soft grip provides increased comfort on the job
• An ideal addition to any toolbox or workshop
• 3-year limited warranty
• Battery and charger sold separately
• Only use genuine Makita batteries and chargers

MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
• Up to 33% more run time per charge compared to BL1830
• Fast 40 minute charging time
• Battery delivers consistent power and run time in extreme temperatures. even in winter (-20&degC)
• Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation. even during high-vibration applications
• Battery resists self-discharge and remains ready for use even after long periods of storage
• Sensitive electronics are protected with a thick gel coating. preventing damage against dust and moisture
• Star protection computer controls – includes overload protection. over-discharge protection and over heat protection
• The battery and tool communicate. protecting your tool and battery from overload by cutting power when put under abnormally high current draw
• If the battery reaches a certain level of heat it will cut power to the tool. protecting the tool and battery from overheating

MAKITA 18V Lithium-ion Dual-Port Rapid Battery Charger DC18RD 1969360

• Fast charging – charges 2 x 3.0Ah Lithium-Ion batteries at the same time in only 22 minutes
• Built-in CPU – gathers information from the battery’s memory chip to determine optimum charging method
• Forced air cooling fan – cools the battery to minimise charging time
• LED charging display
• Full charge sound alert USB port provides 1.5A output for charging smart phones. tablets. etc

MAKITA Canvas Tool Bag Suits LXT418 & LXT423 1999369

• Ideal for transport & storage of your favourite Makita tools
• Weather Resistant
• Durable Nylon Cordura Construction
• Internal Pockets feature straps to retain tools during transit
• External pockets enable storage of accessories and more